Polyhydroxylstearic acid CAS NO 37280-82-3 UltraPerse W180 Dispersants

Shanghai Zhihua ChemTech Co. Ltd.

Download PDF MSDS_UltraPerse_W180.pdf

Material Safety Data Sheet

UltraPerse W180

1.PRODUCT AND COMPANY IDENTIFICATION

Trade name: UltraPerse W180

Product code:  UP-W180

Material uses: Industrial applications: Manufacture of personal care products.

Supplier: Shanghai Zhihua ChemTech Co. Ltd.

Address: Suite C1019, Building 1, 151 Chuansha Rd, Shanghai, 201201, China

Phone: +86-21-31390737

Fax: +86-21-51862903

2. HAZARDS IDENTIFICATION

3.COMPOSITION/INFORMATION ON INGREDIENTS

Substance/preparation : Preparation

Chemical family: Acid. Polymer. Organic.

Occupational exposure limits, if available, are listed in section 8.

4.FIRST AID MEASURES

Inhalation

Move exposed person to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Obtain medical attention if symptoms occur. If unconscious, place in recovery position and get medical attention immediately.Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Ingestion

Wash out mouth with water. Remove dentures if any. Move exposed person to fresh air. Keep person warm and at rest. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Obtain medical attention if symptoms occur. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Skin contact

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Obtain medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

See section 11 for more detailed information on health effects and symptoms.

5.FIRE FIGHTING MEASURES

Extinguishing media

Suitable : Use an extinguishing agent suitable for the surrounding fire.

Special exposure hazards:No specific hazard.

Hazardous thermal decomposition products :These products are carbon oxides (CO, CO2), phosphates.

Special protective equipment for fire-fighters:Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

6.ACCIDENTAL RELEASE MEASURES

Personal precautions

Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment.

Environmental precautions:

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.

Methods for cleaning up 

7.HANDLING AND STORAGE

Handling

Do not get in eyes or on skin or clothing. Keep container closed. Use only with adequate ventilation. Avoid breathing vapour or mist. Wash thoroughly after handling

8.EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure limit values Not available.

Recommended monitoring procedures:If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment. Reference should be made to European Standard EN 689 for methods for the assessment of exposure by inhalation to chemical agents and national guidance documents for methods for the determination of hazardous substances.

No special ventilation requirements. Good general ventilation should be sufficient to control airborne levels. If this product contains ingredients with exposure limits, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.

Respiratory protection :

Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Recommended: organic vapour filter (Type A)

Hand protection:

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

>8 hour/hours (breakthrough time): Viton; <1 hour/hours (breakthrough time): nitrile rubber

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

9.PHYSICAL AND CHEMICAL PROPERTIES

General information

Appearance

Physical state : Liquid.

Colour: Tan. (Light.)

Odour: Aromatic. (Slight.)

Important health, safety and environmental information

PH: 1.9 (Conc. (% w/w): 100) [Acidic.]

Boiling point : >325°C (617°F)

Melting point: -5°C (23°F

Pour point : -5°C

Flash point : Not applicable.

Density : 1.09 g/cm3 (15.6°C / 60.1°F)

Solubility : Soluble in cold water, hot water.

Stability : The product is stable.

Materials to avoid : Reactive or incompatible with the following materials: oxidizing materials, acids and alkalis.

11.TOXICOLOGICAL INFORMATION

Potential acute health effects

Inhalation : No known significant effects or critical hazards.

Ingestion : No known significant effects or critical hazards.

Skin contact : No known significant effects or critical hazards.

Eye contact:Irritating to eyes.

Acute toxicity

Product/ingredient name                                     Test             Result                 Route          Species

Polymeric alkoxylate                                    LD50             >5000 mg/kg       Oral             Rat Dermal

                                                                               LD50               >2000 mg/kg         Rat             Rabbit

Potential chronic health effects

Carcinogenicity :No known significant effects or critical hazards.

Mutagenicity :No known significant effects or critical hazards.

Reproductive toxicity : No known significant effects or critical hazards.

Over-exposure signs/symptoms

12.ECOLOGICAL INFORMATION

Ecotoxicity data

Product/ingredient name              Species                      Period                         Result

Polymeric alkoxylate                  Fish (LC50)                96 hour/hours              >320 mg/l

                                                  Algae (EC50)                96 hour/hours                >100 mg/l

Other ecological information Persistence/degradability Product/ingredient name

Product/ingredient name

UltraPerse 180

Aquatic half-life Photolysis Biodegradability- - Not readily

Polymeric alkoxylate - - Not readily

Other adverse effects : No known significant effects or critical hazards.

13.DISPOSAL CONSIDERATIONS

Methods of disposal

The generation of waste should be avoided or minimised wherever possible. Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

Hazardous waste : Yes.

14.TRANSPORT INFORMATION

International transport regulations

Subsidiary class : - PG* : Packing group

15.REGULATORY INFORMATION

EU regulations

Hazard symbol/symbols :Irritant

Product use: Classification and labelling have been performed according to EU Directives 67/548/EEC and 1999/45/EC (including amendments) and the intended use.

- Industrial applications.

16.OTHER INFORMATION

Full text of R-phrases : R36- Irritating to eyes.

referred to in sections 2 and3 - United Kingdom (UK)

Full text of classifications     : Xi - Irritant

referred to in sections 2 and

3 - United Kingdom (UK)

History

Date of printing: August 28, 2014

Date of issue: August 28, 2014

Date of previous issue : October 21, 2014

Version: 1

Indicates information that has changed from previously issued version.

Notice to reader:

To the best of our knowledge, the information contained herein is accurate. However, neither the above- named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.

Download PDF MSDS_UltraPerse_W180.pdf